Stainless steel faulting

Introduction of adsorption column for experiment:
​It is a slender stainless steel column, which can be used under negative pressure, positive pressure and pressure. The column is parallel and vertical, and the finish is high.
​1. Column system is mainly composed of column frame, column body, filter system and functional tube port;
​2. Column diameter 108-1000 thick 3MM. Design pressure 0.3-1.0mpa;
​3. The column is stainless steel s30408/31603 stainless steel column transition flange and the upper and lower head are connected, and the upper and lower head can be opened by bolts;
​4. Internal filter device, stainless steel filter net or stainless steel water cap, filtration accuracy of 100-400 mesh;
​5. The column is equipped with resin inlet and outlet, observation port and inlet and outlet port; Use of chromatographic column: Suitable for traditional Chinese medicine, food, chemical industry, material purification separation, filtration, full stainless manufacturing, according to the different affinity between the active components of the plant and the resin installed in the chromatographic column, there are different categories or different components, and get the planned effective components or components, for the preparation of high efficacy, small dose of Chinese medicine or plants is a very important accurate means. Operation is divided into general points, sample, elution, regeneration, three major steps.